Designed for Whoop frames using 6mm-8.5mm brushed motors,
ARM STM32F3 processor,
USB socket for firmware flashing and parameter editing,
2 x 5A Dual Mosfets,
Dip switch for both Bind and Boot loader mode,
1.25mm Motor sockets for easy motor connection,
Runs BetaFlight firmware,
DSM2/DSMX Sat receiver mounts on underside of FC,
Dimensions: 28mm x 28mm.
This board can be ordered from OSHpark.
The BOM can be downloaded here.
The Layout can be downloaded here.
The Schematic can be downloaded here.
Released under the Creative Commons Attribution NonCommercial 4.0 License.
Made available without any Express or Implied Warranties